Solano Repairs, LLC Handyman Services logo
Solano Repairs handyman mascot installing recessed lighting in a bright Las Vegas home.

LAS VEGAS VALLEY RECESSED LIGHTING

Recessed Lighting
Installation and Upgrades

Clean, low-profile recessed lighting upgrades for Las Vegas homes, including compatible LED retrofits, fixture replacements, trim updates, and lighting improvements using suitable existing wiring and ceiling locations.

  Call Now

Quality Work
You Can Trust

Clean, Professional
Results

Reliable and
On Time

PLAN THE LIGHT, NOT JUST THE FIXTURE

The Details That Make Recessed Lighting Feel Right

A good recessed-lighting update is more than replacing a round fixture. Light color, brightness, glare control, spacing, dimmer compatibility, and the correct fixture rating all affect how the finished room looks and performs.

Solano Repairs handyman mascot installing a recessed LED ceiling light.
COLOR & QUALITY

Warm, Neutral or Crisp White?

Color temperature changes the feel of a room. About 2700–3000K reads warm, 3500K is more neutral, and 4000K or higher appears cooler. For natural-looking colors, high color rendering also matters; 90+ CRI is a strong choice when appearance is important.

OUTPUT & SPACING

Brightness, Beam Spread and Placement

Brightness is measured in lumens, not watts. Fixture spacing is not one-size-fits-all: ceiling height, beam spread, fixture spacing criteria, room shape, work surfaces, and the desired light level all influence a balanced layout.

COMFORT & RATINGS

Glare Control and the Right Fixture Rating

Regressed lenses and baffle-style trims can reduce glare. In showers and other wet locations, the fixture must be listed for that environment. Where insulation contacts the fixture, the correct IC rating matters; airtight fixtures can also reduce air leakage into attic spaces.

Recessed Lighting Installation, Retrofit and Upgrade Options

Today’s recessed lighting gives homeowners far more choices than the old can-light-and-bulb setup. Existing housings can often accept LED retrofit modules, while newer low-profile and canless products offer selectable color temperatures, multiple light-output options, wet-location models, dimming, and reduced-glare designs.

For Solano Repairs, the first question is what already exists. We focus on compatible replacements, LED retrofits, trims, and upgrades using suitable existing wiring and ceiling locations. Projects that require new circuits, extensive rewiring, or other electrical work outside that scope may need a licensed electrical contractor. For other compatible updates using existing suitable wiring and support, we also offer ceiling fan and light fixture installation.

LED Retrofit Modules for Existing Cans

LED Retrofit Modules for Existing Cans

Many 4-, 5-, and 6-inch recessed housings can accept compatible LED retrofit trims or modules. This can modernize the appearance and light quality without replacing the entire ceiling housing.

Selectable Color and Light Output

Selectable Color and Light Output

Many current fixtures let you select color temperature at installation, commonly from warm 2700K through cooler 5000K. Some also offer selectable lumen output, making it easier to tune the fixture to the room.

Dimmer Compatibility and Flicker Prevention

Dimmer Compatibility and Flicker Prevention

A dimmable LED still needs a compatible dimmer. A poor LED/dimmer match can cause flickering, buzzing, pop-on, or lights that drop out at low settings. Compatibility should be checked before the upgrade is finalized.

Wet, IC and Airtight Ratings

Wet, IC and Airtight Ratings

Fixture ratings matter. Wet-location models are appropriate where required, such as certain shower applications. IC-rated fixtures are designed for permitted contact with insulation, and airtight models can help reduce conditioned-air leakage through the ceiling.

A useful rule: choose by performance, not just appearance.
Match the fixture to the existing opening and wiring, then consider lumens, color temperature, CRI, beam spread, glare control, dimming compatibility, and the environmental rating. A fixture that looks right but performs poorly will be noticeable every day.

Thinking about updating your recessed lighting?

Send photos of the room and the existing fixtures. We can review what is there and determine whether a straightforward retrofit or replacement is a good fit.

What to Expect

We start with the existing ceiling and electrical setup, then match the new lighting to the room instead of treating every recessed fixture as interchangeable.

1
Review the Room
We look at the room, existing fixtures, ceiling height, intended use, and the light level you want.
2
Check Compatibility
We review the housing or opening, existing wiring, insulation conditions, location rating, and any dimmer already in use.
3
Select the Light
We match compatible size, trim, output, color temperature, CRI, glare control, and dimming features to the room.
4
Install, Test and Clean Up
We install the compatible fixtures, test operation and dimming where applicable, and leave the work area clean.

Recessed Lighting Projects We Handle

LED retrofit upgrades
Existing can-light upgrades
Compatible trim replacement
Low-profile LED replacement
Adjustable-color LED upgrades
Higher-CRI lighting upgrades
Dimmable LED replacement
Flickering fixture replacement
Wet-rated fixture replacement
IC-rated fixture upgrades
Airtight downlight upgrades
Room and hallway lighting
Not every recessed-lighting job is the same.
Adding entirely new lighting locations can involve layout work, new wiring, circuit capacity, ceiling access, code requirements, and permits. If the project goes beyond compatible replacement or upgrade work, we can identify that before the job moves forward.

Frequently Asked Questions

Can old recessed cans be upgraded to LED?

Often, yes. Many existing 4-, 5-, and 6-inch housings accept compatible LED retrofit modules or trims. The housing size, socket or connector, mounting method, and fixture listing all need to match.

How far apart should recessed lights be?

There is no single spacing number that works for every room. Proper spacing depends on the fixture’s beam distribution or spacing criteria, ceiling height, room dimensions, work surfaces, and how bright you want the room to feel.

What color temperature is best?

2700–3000K gives a warmer appearance, 3500K is more neutral, and 4000K or higher appears cooler. The best choice depends on the room, finishes, natural light, and the look you prefer. Selectable-CCT fixtures can make that decision easier.

What does CRI mean?

CRI describes how faithfully colors appear under a light source. A CRI of 80 is a common baseline for interior lighting, while 90+ CRI generally provides very good color rendering for finishes, furnishings, artwork, and skin tones.

Why do some LED recessed lights flicker on a dimmer?

The LED and dimmer may not be compatible, or the dimmer may need its low- or high-end trim adjusted. Dimmable fixtures still need a compatible control; otherwise flicker, buzzing, pop-on, or low-end dropout can occur.

Can recessed lighting be used over a shower?

Only when the specific fixture is listed for the location and installed as required. Wet-location recessed fixtures and trims are available for appropriate shower and moisture-exposed applications.

What is IC-rated or airtight recessed lighting?

IC-rated fixtures are designed for permitted contact with insulation. Airtight fixtures are designed to limit air leakage through the ceiling. These ratings are especially worth checking when recessed lights open into an attic or insulated ceiling cavity.

Can you add brand-new recessed lights where none exist?

That can require new wiring, circuit work, ceiling access, permits, and other electrical work. Solano Repairs focuses on compatible replacement and upgrade work using suitable existing wiring and locations; projects outside that scope may require a licensed electrical contractor.

Ready to improve your recessed lighting?

Call Solano Repairs or send photos of the existing fixtures so we can review the setup and the upgrade you have in mind.